蔬菜包装厂家   欢迎进入山东国泰民沣包装科技有限公司网站,专注纸托盘,瓦楞纸箱,蔬菜包装,重型纸箱包装制作厂家,实惠!
重型纸箱厂家
瓦楞纸箱厂家
蔬菜包装厂家

重型纸箱箱体变形的影响因素!

来源:https://www.gtmfpack.com 发布时间:2021-07-07

一、纸板含水量的适中。生活中的很多事或物都有适合它自己的一个点,纸板的含水量如果过多,就会导致纸板的硬度大大降低,还会影响纸板的边压程度。
1、 The moisture content of paperboard is moderate. Many things or things in life have a point suitable for it. If the moisture content of the paperboard is too much, it will lead to a great reduction in the hardness of the paperboard and affect the edge pressure of the paperboard.
二、重型瓦楞纸箱的楞形情况。瓦楞的形状分为U型、V型和UV型。U型瓦楞弹性好,伸张性和吸收性高,但强度不稳定。V型瓦楞粘合性差,易剥分离,但是强度高。一般建议使用UV型,正如其名的将U型和V型的优点汇聚。
2、 The shape of heavy corrugated box. Corrugated shape is divided into U-shape, V-shape and UV type. U-shaped corrugated has good elasticity, high stretch and absorption, but unstable strength. V-shaped corrugated has poor adhesion, easy to peel and separate, but high strength. It is generally recommended to use the UV type, just as its name implies, to combine the advantages of the U-type and the V-type.
三、纸板的粘合强度要大。瓦楞纸与面纸、里纸等之间的相互粘合叫做纸板的粘合强度。如出现假粘现象,其重型瓦楞纸箱的抗压程度也会下降,瓦楞纸板在受压后就会层层分离。
重型纸箱厂家
3、 The adhesive strength of paperboard should be high. Corrugating paper and face paper, paper and so on between the mutual adhesion is called the adhesive strength of paperboard. If there is false sticky phenomenon, the compression degree of the heavy corrugated box will also decline, and the corrugated board will separate layer by layer after being compressed.
四、重型瓦楞纸箱纸板层数的合理化。合理的层数设计会提高纸箱本身的抗压性能,不合理的层数设计自然也会提高纸箱的破损率。建议可以根据所要包装的产品特性、重量、储存运输条件、码放高度以及储存时间等一系列问题来考虑设计纸板的层数。
4、 Rationalization of the number of layers of heavy corrugated cardboard box. Reasonable layer design will improve the compression performance of the carton itself, and unreasonable layer design will naturally improve the damage rate of the carton. It is suggested that the number of layers should be considered according to the product characteristics, weight, storage and transportation conditions, stacking height and storage time.
五、在生产过程中应当注意控制纸箱与机器间隙之间的压力。以免出现瓦楞压溃、变形等情况的发生,降低了纸箱的抗压程度。
5、 In the production process should pay attention to control the pressure between the carton and the machine gap. In order to avoid corrugating collapse, deformation and other situations, reduce the compression degree of the carton.

相关:

返回顶部