蔬菜包装厂家   欢迎进入山东国泰民沣包装科技有限公司网站,专注纸托盘,瓦楞纸箱,蔬菜包装,重型纸箱包装制作厂家,价格实惠!
重型纸箱厂家
瓦楞纸箱厂家
蔬菜包装厂家

瓦楞纸箱的生产流程全介绍!

来源:https://www.gtmfpack.com 发布时间:2021-10-06

1、粘/钉条:又叫搭接舌,通常叫糊口。是为了瓦楞纸箱合围成型而在箱子的一侧多出来部分,粘/钉条高跟瓦楞纸箱同高,长度一般约为30~40mm。
1. Stick / nail strip: also known as lap tongue, usually called life. It is the extra part on one side of the box for the enclosure forming of corrugated box. The adhesive / nail strip is the same height as the corrugated box, and the length is generally about 30 ~ 40mm.
2、摇盖:又叫E盖,分为外摇盖和内摇盖。一般长边的摇盖放在外面为外摇盖,折叠时合拢;宽边摇盖放在里面为内摇盖,折叠后不合拢。根据内外摇盖的不同长度可以把瓦楞纸箱分为若干种。
2. Swing cover: also known as e cover, it is divided into outer swing cover and inner swing cover. Generally, the long side swing cover is placed outside as the outer swing cover, which is closed when folded; The wide side swing cover is placed inside as an inner swing cover, which is not closed after folding. Corrugated boxes can be divided into several types according to the different lengths of inner and outer swing covers.
3、箱唛:瓦楞纸箱上印刷的说明所装产品名称,数量及瓦楞纸箱尺寸等的图案和文字。箱唛的内容由客户确定,根据印制的位置可分为正唛、侧唛,正唛印在箱子的长方向,侧唛印在箱子的宽方向;如果箱子的长方向两面印的内容不同,为了区分,把正唛分为条唛和正唛;条唛为连着钉条的长方向,另一面则为正唛。
3. Shipping mark: the pattern and text printed on the corrugated box indicating the name, quantity and size of the corrugated box. The content of the box mark is determined by the customer. According to the printing position, it can be divided into positive mark and side mark. The positive mark is printed in the long direction of the box and the side mark is printed in the wide direction of the box; If the contents printed on both sides of the long direction of the box are different, in order to distinguish, the positive marks are divided into strip marks and positive marks; The shipping mark is the long direction connected with the nail strip, and the other side is the positive shipping mark.
4、开槽:摇盖之间的开口,高度同摇盖高度。
4. Slotting: the opening between the swing covers, with the same height as the swing cover.
5、手挽:又叫手扣.一般在瓦楞纸箱侧面,形状常为两头圆的矩形,上部直线啤半穿,其余全穿;手挽要根据客户的要求确定大小及位置,一般不能啤到图案。
5. Hand pull: also known as hand buckle. Generally on the side of corrugated box, the shape is often a rectangle with two round ends. The upper straight line beer is half worn, and the rest are all worn; The size and position of the arm should be determined according to the customer's requirements. Generally, the pattern can't be found.
6、高低线:瓦楞纸箱的高低线指瓦楞纸箱内外摇盖的压线不在同一直线上;内摇盖压线比外摇盖压线低约一张瓦楞纸的厚度。
6. High low line: the high low line of the corrugated box means that the pressing lines of the inner and outer swing covers of the corrugated box are not in the same straight line; The pressure line of the inner swing cover is about one piece of corrugated paper lower than that of the outer swing cover.
7、印后加工post-pressprinting:使印刷产品获得所要求的形状和使用性能的生产工序。
7. Post press spraying: a production process that enables printed products to obtain the required shape and performance.
8、模切:diecutting以钢刀片排成模(或用钢板雕刻成模)、框。在模切机上把纸片轧切成一定形状的工序。
8. Die cutting: diecuting forms a mold (or carves a mold with a steel plate) and a frame with a steel blade. The process of rolling paper into a certain shape on a die-cutting machine.
9、压痕:Crease/Score利用钢线,通过压印,在纸片上压出痕迹或留下供弯折的槽痕。一般通过模切机完成。
9. Indentation: crease / score uses steel wire to press out marks or leave groove marks for bending on the paper by embossing. Generally completed by die-cutting machine.
10、结合方式:Joint常用的结合方式有粘合(glue),自锁(selflock),胶带封合(tape),钉合(Staple)等等。
10. Bonding method: the common bonding methods of joint include glue, self lock, tape, staple, etc.
以上的精彩内容来自: 重型纸箱厂家更多的精彩内容来自:欢迎大家与我们进行交流。https://www.gtmfpack.com
The above wonderful content comes from: heavy carton manufacturers. More wonderful content comes from: welcome to communicate with us. https://www.gtmfpack.com

相关推荐:

返回顶部