蔬菜包装厂家   欢迎进入山东国泰民沣包装科技有限公司网站,专注纸托盘,瓦楞纸箱,蔬菜包装,重型纸箱包装制作厂家,实惠!
重型纸箱厂家
瓦楞纸箱厂家
蔬菜包装厂家

[托盘厂家]木托盘使用时应该注意什么?如何放置可以减少对

来源:https://www.gtmfpack.com 发布时间:2020-06-04

  木托盘的使用十分广泛,其优点十分显著,经久耐用,方便快捷。正因为如此,很多人并不在乎它,随心所欲,不认为它有任何影响。事实上,这不是真的。合理放置木托盘不仅可以防止货物损坏,还可以减少很多不必要的运输麻烦,提高木托盘的使用寿命。
  The use of wooden pallet is very extensive, its advantages are very significant, durable, convenient and fast. Because of this, many people don't care about it, do what they want and don't think it has any influence. In fact, it's not true. Reasonable placement of wooden pallet can not only prevent the damage of goods, but also reduce many unnecessary transportation troubles and improve the service life of wooden pallet.
托盘厂家
  为了满足装车、运输、储存的要求,提高物流周转效率,采用包装组合方式摆放在托盘上的货物应进行捆扎包装,便于机械叉车或手动液压叉车装卸运输。此外,选择正确的托盘。根据货物的种类、托盘上货物的质量和托盘的大小,合理确定托盘上货物的摆放方式,托盘上货物的承载表面积利用率一般应不低于80%。
  In order to meet the requirements of loading, transportation and storage, and improve the efficiency of logistics turnover, the goods placed on pallets by packaging combination shall be bundled and packed, so as to facilitate the loading, unloading and transportation of mechanical forklift or manual hydraulic forklift. In addition, select the correct tray. According to the type of goods, the quality of the goods on the pallet and the size of the pallet, reasonably determine the way of placing the goods on the pallet, and the utilization rate of the carrying surface area of the goods on the pallet shall not be less than 80%.
  木质托盘应遵循受力平衡的原则,一些不规则的货物,如机械、大型铸件等货物应考虑在托盘上增加木质隔断,避免将货物直接放在托盘上,使托盘受力不均匀造成损坏;袋装货物应采用多层交错压实码,避免高空坠落。钢瓶货物(如密封金属容器)放置一层或多层,并用木盖加固;圆柱形容器采用金属圆筒或单层货物垂直放置,加装框架和板条加固结构;易碎物品应分层存放。货物的每一层都应增加木制或塑料隔板以隔开货物。总布置图完成后,对货物进行包装,并在货物外表面包上包装膜。
  Wooden pallets shall follow the principle of stress balance. For some irregular goods, such as machinery, large castings and other goods, wooden partition shall be added to the pallets to prevent the goods from being directly placed on the pallets, which may cause damage due to uneven stress on the pallets; the bagged goods shall be multi-layer staggered compaction code to avoid falling from high altitude. Steel cylinder goods (such as sealed metal containers) shall be placed in one or more layers and reinforced with wooden covers; cylindrical containers shall be placed vertically with metal cylinders or single layer goods and reinforced with frames and battens; fragile goods shall be stored in layers. Wooden or plastic partitions shall be added to each layer of the goods to separate the goods. After the general layout is completed, the goods shall be packed and wrapped with film on the surface of the goods.
  以上是托盘厂家小编为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.gtmfpack.com
  The above is the relevant content introduced by the tray manufacturer. If you want to know more, please visit the website: http://www.gtmfpack.com

相关:

返回顶部