蔬菜包装厂家   欢迎进入山东国泰民沣包装科技有限公司网站,专注纸托盘,瓦楞纸箱,蔬菜包装,重型纸箱包装制作厂家,实惠!
重型纸箱厂家
瓦楞纸箱厂家
蔬菜包装厂家

瓦楞纸箱厂家为您讲解碰线机精度对纸箱的影响

来源:https://www.gtmfpack.com 发布时间:2020-04-26

  纸箱触线作为纸箱生产厂家的一项重要工艺,用于压平线(垂直瓦楞纸线),对纠正纸箱问题起着关重要的作用。
  As an important process of the carton manufacturer, the contact line of the carton is used to flatten the line (vertical corrugated line), which plays an important role in correcting the problem of the carton.
  纸板接触线的精度是瓦楞纸箱生产质量的关键。现在,即使是的生产线生产过程的纸板挂在中间,两边不一致,导致纵切肉板精度误差+ / - 1毫米,和高档纸箱的接触线精度要求+ / - 1毫米之内,如何避免纸板原始纵向切割错误,减少纸板板接触线错误的过程中接触线是自动选择的关键线触摸机器。
瓦楞纸箱厂家
  The accuracy of the contact line is the key to the production quality of corrugated box. Now, even if the cardboard of the most advanced production line is hung in the middle, the two sides are inconsistent, resulting in the accuracy error of the longitudinal cutting of the meat board + / - 1mm, and the accuracy requirement of the contact line of the high-grade cartons + / - 1mm. How to avoid the original longitudinal cutting error of the cardboard, and how to reduce the contact line error of the paper board in the process of the contact line is the key line touch machine for automatic selection.
  (1)“滚筒式”线对撞机在精度上能保证对纸盒的高精度要求,而抖动盖的尺寸也不能保证。
  (1) The "drum type" line collider can guarantee the high precision of the carton in terms of precision, and the size of the shaking cover can not be guaranteed.
  “一步式”线对撞机比辊型线对撞机在直线对撞机的精度,如果“一步”的过程处理“刀”平直度的问题,应该是确保盒子的准确性高摇盖,但瓦楞纸箱厂家和设备操作的高要求。(3)自动龙门”双直线电机采用两个手工单机碰线单元在同一指南,使用二级单位的计算机伺服控制的移动接触线,以确保高箱,在二级行接触单元和二次触摸后单元移动凸轮定位纸板,纸板前端触摸板定位后的两组触线单元串联,如模切机的影响,前辊盖与纸箱的高精度可达+ / - 0.5毫米切割纸板纵向误差积累到后端抖动盖。既保证了线碰撞的精度,又避免了纵向切割的精度误差。机器的精度可以满足自动包装有限公司的要求。它们大多用于上述情况:
  The accuracy of the "one-step" line collider is higher than that of the roller type line Collider in the linear collider. If the "one-step" process deals with the problem of "knife" straightness, it should be to ensure the accuracy of the box with high swing cover, but the corrugated box manufacturers and equipment operators have high requirements. (3) The double linear motor of automatic gantry adopts two manual single touch line units in the same guide, and uses the moving contact line controlled by the computer servo of the secondary unit to ensure the high box. After the secondary line contact unit and the secondary touch unit move the cam positioning paperboard. The two groups of contact line units after the front touch board positioning of the paperboard are connected in series, such as the influence of die-cutting machine, The high precision of the front roll cover and the carton can reach + / - 0.5mm, and the longitudinal error of the cutting paperboard can accumulate to the rear shaking cover. It not only ensures the accuracy of line collision, but also avoids the accuracy error of longitudinal cutting. The accuracy of the machine can meet the requirements of automatic packaging Co., Ltd. Most of them are used in the above situations:
  1.纸板太坏,或纸板的线容易爆裂,用纸板压线时,会出现水平压线折叠不够;
  1. The paperboard is too bad, or the line of the paperboard is easy to burst. When pressing the line with the paperboard, there will be insufficient folding of the horizontal pressing line;
  2.有些纸箱会有边缘印刷(卧式压线上有印刷),纸板压线后无法印刷,所以印刷后需要单机触摸;
  2. Some cartons will have edge printing (there is printing on horizontal pressing line), and the cardboard cannot be printed after pressing line, so it needs to be touched by a single machine after printing;
  3.将使用一些小的批量更改用例。
  3. Some small batch change cases will be used.
  4.有些纸板太硬,客户手工包装时很难折叠和摇动盖子,还需要一台机器去接触电线
  4. Some cardboard is too hard for customers to fold and shake the cover when packing by hand, and a machine is needed to contact the wire
  主要原因是以上四种,其他情况下很少能用来触摸电线机。
  The main reason is that in other cases, it is rarely used to touch the wire machine.
  以上是瓦楞纸箱厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.gtmfpack.com
  The above is the relevant content introduced by the corrugated box manufacturer for you. To learn more, please visit the website: http://www.gtmfpack.com

相关:

返回顶部