在重型瓦楞纸箱的日常生产过程中，有一个非常重要的生产过程，那就是造纸生产线。压力线有自己的分类，有平压线、高低压线、凹凸压线。压平是指压线在非印刷表面的位置;高压线和低压线意味着我们的纸箱震盖尺寸不一样;而凹凸压印线是指我们在瓦楞纸板机上，所使用的压印线轮是公压线轮和母压线轮，所以出纸板是凹凸压印线。为了防止压力线断裂，一般瓦楞纸板厂更常用凹凸线，这就是瓦楞纸板为什么会出现波浪纹。如何自定义线的宽度?这主要是看瓦楞纸板的厚度，纸板越厚，线越宽。
In the daily production process of heavy corrugated box, there is a very important production process, which is the paper production line. Pressure line has its own classification, including flat pressure line, high and low pressure line, concave and convex pressure line. Flattening refers to the position of the embossing line on the non printing surface; high-voltage line and low-voltage line mean that the size of the shock cover of our cartons is different; while concave convex embossing line refers to the embossing line wheel used by us on the corrugated board machine is the male embossing line wheel and the female embossing line wheel, so the outgoing board is the concave convex embossing line. In order to prevent the pressure line from breaking, the concave convex line is commonly used in corrugated board factory, which is why corrugated board will have wavy lines. How to customize the width of the line? This is mainly to see the thickness of the corrugated board. The thicker the board is, the wider the line is.
那么，为什么分离器打破沉重的瓦楞纸板板?其原理是设备的调整不够合理，导致线辊之间的间隙过小。纸板在纸张质量上，定量低。硬纸板的湿度太低。还有硬纸板的火柴纸不太合理。究其原因可以从源头上找到，在无法改变纸张和纸张的情况下，调整设备和纸板的含水率，利用预压线配合指线压机做好各方面的调整。
So, why does the separator break the heavy corrugated board? Its principle is that the adjustment of the equipment is not reasonable, resulting in the gap between the line rollers is too small. Paperboard in paper quality, low quantitative. The humidity of the cardboard is too low. And matchpaper on cardboard is not reasonable. The reason can be found from the source, in the case of unable to change the paper and paper, first adjust the moisture content of the equipment and paperboard, and use the pre pressing line with the finger wire press to do all aspects of adjustment.
压纸机由切刀、压纸辊、中心轴、转轴、机架等主要部件组成。根据切辊和线辊的数量分成两组成线压机和三组成线压机。它是根据承重瓦楞纸箱的构造，沿瓦楞纸板和瓦楞纸板方向的垂直压力线，并切成所需的规格尺寸。
The press consists of cutter, press roll, central shaft, rotating shaft, frame and other main parts. According to the number of cutting roller and line roller, it is divided into two parts of line press and three parts of line press. It is a vertical pressure line along the direction of corrugated board and corrugated board according to the structure of load-bearing corrugated box, and cut into the required size.
以上是
瓦楞纸箱厂家小编为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.gtmfpack.com
The above is a brief introduction of corrugated box manufacturers. For more information, please visit http://www.gtmfpack.com
