蔬菜包装厂家   欢迎进入山东国泰民沣包装科技有限公司网站,专注纸托盘,瓦楞纸箱,蔬菜包装,重型纸箱包装制作厂家,实惠!
重型纸箱厂家
瓦楞纸箱厂家
蔬菜包装厂家

延长塑料托盘的使用寿命的方法有哪些?

来源:https://www.gtmfpack.com 发布时间:2020-07-22

塑料托盘做为仓储物流行业不可或缺的一份子,发挥着重大的作用。塑料托盘按照正确运用规范运用的话,不但能够充分发挥其自身的作用外,还能够延伸其运用寿命,下降塑料托盘的采购本钱。
As an indispensable part of warehousing and logistics industry, plastic pallet plays an important role. If the plastic pallet is used according to the correct application specification, it can not only give full play to its own role, but also extend its service life and reduce the purchasing cost of plastic pallet.
塑料托盘运用时应留意一下几点:
The following points should be paid attention to when using plastic pallet:
1.应轻放塑料托盘,防止落地时受力不均,发生损坏。
1. The plastic tray should be placed gently to prevent uneven force and damage when landing.
2.放置货品时,应均匀放置,防止起升转移时,发生侧歪。
2. When placing the goods, they should be evenly placed to prevent the occurrence of sidesway during lifting and transferring.
3.运用转移设备时,应考虑货差尺度是否合适此塑料托盘运用,防止尺度不合适,撑坏塑料托盘。
3. When using the transfer equipment, it is necessary to consider whether the size of the goods difference is suitable for the use of the plastic pallet, so as to prevent the plastic pallet from being damaged due to the improper scale.
4.堆垛运用时,应考虑更下面一块托盘的承重
4. When stacking, the load bearing of the bottom pallet should be considered
托盘厂家
标准托盘
Standard pallet
正确的运用塑料托盘应该做到包装组合码放在塑料托盘上加上适当的捆扎和裹包,便于利用机械装卸和运送,从而满意装卸、运送和存储的要求。
The correct use of plastic pallets should be made to pack and stack on the plastic pallets with appropriate bundling and wrapping, so as to facilitate mechanical loading and unloading and transportation, so as to meet the requirements of loading and unloading, transportation and storage.
1. 塑料托盘应防止遭受阳光暴晒,避免引起老化,缩短运用寿命。
1. The plastic tray should be protected from sunlight exposure to avoid aging and shorten the service life.
2. 禁止将货品从高处抛掷在塑料托盘内。合理确认货品在托盘内的堆积方式。货品均匀置放,不要会集堆积,偏心堆积。承载重物的托盘应放在平整的地上或物体表面上。
2. It is forbidden to throw the goods in the plastic tray from a height. Reasonably confirm the stacking mode of goods in the pallet. The goods should be placed evenly. Do not gather and pile up. Pallets carrying heavy objects should be placed on the flat ground or on the surface of objects.
3.禁止将塑料托盘从高处抛落,防止因猛烈地碰击而形成托盘破碎、裂纹。
3. It is forbidden to throw the plastic tray from high place to prevent the tray from breaking and cracking due to violent impact.
4.叉车或手动液压车作业时,叉刺尽量向托盘叉孔外侧靠足,叉刺应悉数伸进托盘内,平稳抬起托盘后才可变换角度。叉刺不可碰击托盘旁边面避免形成托盘破碎、裂纹。
4. When forklift truck or manual hydraulic truck is working, the fork thorn shall lean to the outside of the fork hole of the tray as far as possible, and all the fork thorn shall be extended into the tray, and the angle can be changed after the tray is lifted stably. Fork thorn can not hit the side of the tray, to avoid the formation of tray breakage, cracks.
5.标准托盘上货架时,有必要选用货架型托盘,承载量根据货架结构而定,禁止超载运用。
5. When the standard pallet is put on the shelf, it is necessary to select the shelf type pallet, and the bearing capacity is determined according to the shelf structure, and overloading is prohibited.
本文由托盘厂家提供技术支持,更多的详细精彩内容请点击我们的网站http://www.gtmfpack.com,我们将会全心全意为您提供满意的服务。
This paper is supported by pallet manufacturers. For more details, please click our website http://www.gtmfpack.com We will provide you with satisfactory service wholeheartedly.

相关:

返回顶部